Semi-Automatic Workflow for Air-Conditioning System Zoning and Simulation Yikun Yang Tongji University, China Yiqun Pan Tongji University, China Georg Suter Design Computing Group, Austria This is a section of CONVR 2023 - Proceedings of the 23rd International Conference on Construction Applications of Virtual Reality (DOI: 10.36253/979-12-215-0289-3) by Pietro Capone, Vito Getuli, Farzad Pour Rahimian, Nashwan Dawood, Alessandro Bruttini, Tommaso Sorbi Firenze University Press Florence 2023 https://doi.org/10.36253/10.36253/979-12-215-0289-3.105

Available for academic research purposes

Open Access

Copyright Author(s)

Content licence CC BY-NC 4.0

Metadata licence CC0 1.0

This is original content, published for academic research purposes

 Digital edition XML powered by Booksflow

Building information modeling (BIM) shows its potential in the performance driven design, where multiple design solutions are generated and selected against certain design goals. This paper proposes a workflow to generate and simulate multiple thermal zoning schemes toward a semi-automatic design process of air-conditioning (AC) system. Thermal zoning plays a pivotal role in the design thinking of engineers by synthesizing load calculation, equipment sizing, and pipe/duct layout. However, it is often done intuitively with influence on performance unknown at the initial stage. To make it quantitative, we decompose the zoning process into three levels (thermal/control/system) of space aggregation, joining both semantic and numeric characteristics. For the semantic part, space functions are considered by space labeling, accessibility, and adjacency. As to the numeric part, spaces are zoned based on their thermal response similarities, revealed by dynamic mode decomposition on simulated free-float temperature. Then, the system zoning is generated by rolling out convenient distribution network layouts, representing typical fan-coil or variable-air-volume systems. Variables at each level contribute to the "generative" zoning. Based on multiple zoning schemes, the configurations are serialized into EnergyPlus and Modelica inputs for co-simulation. Initial cost, energy consumption, and comfort level of conditioning join together for the zoning evaluation. The entire workflow is implemented in Grasshopper with self-developed plugins

 BIM Thermal zoning Generative design HVAC system Performance simulation

It is available online at https://doi.org/10.36253/10.36253/979-12-215-0289-3.105

References Berquist, J., Tessier, A., O’Brien, W., & Attar, R. (2017, May). An investigation of generative design for heating, ventilation, and air-conditioning. In Proceedings of the symposium on simulation for architecture and urban design. 10.5555/3289787.3289805 Boskic, L., Brown, C.N., & Mezić, I. (2020). Koopman mode analysis on thermal data for building energy assessment. Advances in Building Energy Research. 10.1080/17512549.2020.1842802 Brahme, R., Mahdavi, A., Lam, K.P., Gupta, S. (2001, August). Complex building performance analysis in early stages of design: A solution based on differential modeling, homology-based mapping, and generative design agents. In Proceedings of Building Simulation Conference of IBPSA (Vol. 7, p. 661-668). 10.26868/25222708.2001.0661-668 Bres, A., Judex, F., Suter, G. de Wilde, P. (2017, September). A method for automated generation of HVAC distribution subsystems for building performance simulation. In Proceedings of Building Simulation Conference of IBPSA (Vol. 15, p. 1548-1557). 10.26868/25222708.2017.413 Chen, K. K., Tu, J. H., & Rowley, C. W. (2012). Variants of Dynamic Mode Decomposition: boundary condition, Koopman, and Fourier analyses. Journal of Nonlinear Science, 22, 887-915. 10.1007/s00332-012-9130-9 Chen, Z., Guan, H., Yuan, X., Xie, T., Xu, P. (2022). Rule-based generation of HVAC duct routing. Automation in Construction. 139, 104264. 10.1016/j.autcon.2022.104264 Fischer, M., Aalami, F., Akbas, & Akbas, R. (1998). Formalizing product model transformations: case examples and applications. In Artificial Intelligence in Structural Engineering, Information Technology for Design, Collaboration, Maintenance, and Monitoring. 113-132. 10.1007/BFb0030447 Fu, M., Liu, R., Qi, B., & Issa, R. R. (2020). Generating straight skeleton-based navigation networks with Industry Foundation Classes for indoor way-finding. Automation in Construction, 112, 103057. 10.1016/j.autcon.2019.103057 Georgescu, M., & Mezić, I. (2015). Building energy modeling: A systematic approach to zoning and model reduction using Koopman Mode Analysis. Energy and Buildings, 86, 794-802. 10.1016/j.enbuild.2014.10.046 Held, S., Korte, B., Rautenbach, D., & Vygen, J. (2011). Combinatorial optimization in VLSI design. Combinatorial Optimization-Methods and Applications, 31, 33-96. Medjdoub, B., & Bi, G. (2018). Parametric-based distribution duct routing generation using constraint-based design approach. Automation in Construction, 90, 104-116. 10.1016/j.autcon.2018.02.006 Mezić, I. (2005). Spectral properties of dynamical systems, model reduction and decompositions. Nonlinear Dynamics, 41, 309-325. 10.1007/s11071-005-2824-x Raak, F., Susuki, Y., Mezic, I., & Hikihara, T. (2016, December). On Koopman and Dynamic Mode Decompositions for application to dynamic data with low spatial dimension. In Proceedings of IEEE 55th Conference on Decision and Control (CDC) (6485-6491). 10.1109/CDC.2016.7799267 Roudsari, M.S., & Pak, M. (2013, August). Ladybug: A parametric environmental plugin for Grasshopper to help designers create an environmentally-conscious design. In Proceedings of Building Simulation Conference of IBPSA (Vol 13. p. 3128-3125). 10.26868/25222708.2013.2499 Rowley, C. W., Mezić, I., Bagheri, S., Schlatter, P., & Henningson, D. S. (2009). Spectral analysis of nonlinear flows. Journal of Fluid Mechanics, 641, 115-127. 10.1017/S0022112009992059 Schmid, P. J. (2022). Dynamic Mode Decomposition and its variants. Annual Review of Fluid Mechanics, 54, 225–254. 10.1146/annurev-fluid-030121-015835 Sugihara, K. (2013). Straight Skeleton for automatic generation of 3-D building models with general shaped roofs. In Proceedings of the 21st International Conference on Computer Graphics, Visualization and Computer Vision. Suter, G. (2015, July). Definition of views to generate, visualize, and evaluate multi-view space models of schematic building designs. In Proceedings of 22nd International Workshop: Intelligent Computing in Engineering, EG-ICE. Suter, G. (2022). Modeling multiple space views for schematic building design using space ontologies and layout transformation operations. Automation in Construction, 134, 104041. 10.1016/j.autcon.2021.104041 Visschers, M.G. (2016). BIM based whole-building energy analysis towards and improved interoperability: A conversion from the IFC file format to a validated gbXML file format. Master thesis. Technische Universiteit Eindhoven. Wetter, M., Benne, K., Gautier, A., Nouidui, T.S., Ramle, A., Roth A., Tummescheit, H., Mentzer, S. & Winther C. (2020, September). Lifting the garage door on Spawn, an open-source BEM-controls engine. In Proceedings of Building Performance Modeling Conference and SimBuild (p. 518-525). https://api.semanticscholar.org/CorpusID:221857040